Viz�an Idoipe, Antonio.

Proceedings of the XV Ibero-American Congress of Mechanical Engineering : Cibim 22 / Cibem 22. - 1st ed. - 1 online resource (466 pages)

Intro -- Preface -- Organization -- Contents -- Mechanics -- Bayesian Inversion of a Non-linear Dynamic Model for Stockbridge Dampers -- 1 Introduction -- 2 Methodology -- 2.1 Experimental Test-Rig -- 2.2 Brief Description of the Predictive Deterministic Model -- 2.3 Brief Description of the Stochastic Approach -- 3 Casuistic Study and Results -- 4 Conclusions -- References -- Study and Optimization of a Numerical Algorithm for Hydrodynamic Lubrication Problems with Cavitation -- 1 Introduction -- 2 Methodology -- 2.1 Method of Characteristics -- 2.2 Berm�udez-Moreno Algorithm -- 2.3 Mass Conservation -- 3 Results -- 3.1 Model Validation -- 3.2 Convergence Study -- 3.3 Mass Conservation Study -- 4 Conclusions -- References -- Wake Interactions in an Asymmetric Binary Cylinder System in the Subcritical - Supercritical Regime -- 1 Introduction -- 2 Methodology -- 2.1 Water Tank -- 2.2 Wind Tunnel -- 3 Results -- 3.1 Single Cylinder -- 3.2 Binary System Wakes Measured in Water -- 3.3 Binary System Wakes Measured in Wind Tunnel -- 4 Conclusions -- References -- Contribution to Mathematical Modeling and Numerical Simulation of Welding Processes -- 1 Introduction -- 1.1 Welding Problem -- 2 Mathematical Modeling -- 2.1 Equations of Conservation of Mass and Momentum -- 2.2 Equation of Energy Conservation -- 3 Numerical Method -- 4 Results -- 5 Conclusions -- References -- Dimensionless Coefficients for Validation and Evaluation of a CFD Methodology Applied to a H-Darrieus Vertical Axis Wind Turbine -- 1 Introduction -- 2 Methodology -- 2.1 Computational Domain -- 2.2 Spatial Discretization -- 2.3 Modelling setup -- 3 Results and Discussion -- 4 Conclusions -- References -- Changes in Hardness and Volume of Polymers in Contact with Lubricants Used in Electric Vehicle Transmissions -- 1 Introduction -- 2 Materials y Methods -- 2.1 Materials. 2.2 Aging of Materials -- 2.3 Materials Characterization -- 2.4 Complementary Tests -- 3 Results -- 3.1 Volume Variation -- 3.2 Hardness Variation -- 3.3 Complementary Tests -- 4 Conclusions -- References -- Calculation of Williams-Landel Ferry Shift Factors via Probe Tack Testing for Uncured Prepreg Materials -- 1 Introduction -- 2 Method -- 2.1 Materials -- 2.2 Differential Scanning Calorimetry -- 2.3 Rheology -- 2.4 Adhesion Tests -- 3 Results -- 3.1 DSC -- 3.2 Rheology -- 3.3 Adhesion Tests -- 4 Conclusions -- References -- Modal Analysis of a 2R Flexible Platform Using Screw Theory -- 1 Introduction -- 2 Beam Element Derivation Using Screw Theory -- 3 Modal Analysis -- 4 Conclusions -- References -- OpenBeam: Off-Line and On-Line Tools to Solve Static Analysis of Mechanical Structures -- 1 Introduction -- 2 Methods -- 2.1 Direct Stiffness Matrix Method -- 2.2 Distributed Loads -- 2.3 Meshing -- 2.4 Eigen3 Library -- 2.5 MRPT-opengl Library -- 2.6 Emscripten -- 3 Results -- 3.1 The Openbeam C++ Library -- 3.2 Implemented Finite Elements -- 3.3 YAML Structure Definition Language -- 3.4 Applications -- 4 Conclusions -- References -- Failure Analysis of a Conveyor Belt Rail (Tripper) of Mineral -- 1 Introduction -- 2 Results and Analysis -- 2.1 Visual Inspection -- 2.2 Chemical Composition Analysis -- 2.3 Hardness Measurement -- 2.4 Metallographic Analysis -- 2.5 Micro Hardness Measurement -- 3 Conclusions -- References -- Vibration Analysis in Agricultural Vehicles for Fault Detection -- 1 Introduction -- 2 Methodology -- 2.1 Decision Tree -- 2.2 Obtaining Features -- 2.3 Extracted Characteristics -- 3 Results -- 3.1 Feature Analysis -- 4 Conclusion -- References -- Collaborative Project to Improve Teaching of Cams' Kinematic and Dynamic Analysis Using Spreadsheets -- 1 Introduction -- 2 Theoretical Basis on the Calculation of Cams. 2.1 Introduction, Working Principle, and Applications -- 2.2 Terminology and Classification of Cam Systems -- 2.3 Fundamental Law of Cam Design and Kinematic Diagrams -- 2.4 Follower Displacement Math Functions -- 2.5 Cam Size -- 3 Cam Profile Analysis and Design Validation -- 4 Computer Application Design -- 4.1 First Part: Kinematic Analysis -- 4.2 Second Part: Dynamic Analysis -- 4.3 Spreadsheets of Results -- 4.4 Technical Manual -- 5 Conclusions -- References -- Thermo-mechanical Stress Modeling of La(Fe,Co,Si)13 Thin Films Deposited on Porous Structures -- 1 Introduction -- 2 Computational Methods -- 2.1 Mathematical Model -- 2.2 Initial and Boundary Conditions -- 3 Results and Discussion -- 4 Conclusions -- References -- Isolation and Characterization of Crystalline Cellulose Nanofibers (CNF'S) from Guadua Angustifolia Kunth (GAK) -- 1 Introduction -- 2 Materials and Methods -- 2.1 Materials -- 2.2 Isolation of CNF'S -- 3 Characterization of Microfibers and Nanofibers -- 3.1 Atomic Force Microscopy (AFM) -- 3.2 Fourier Transform Infrared Spectroscopy (ATR-FTIR) -- 3.3 Thermogravimetric Analysis (TGA) -- 3.4 X-Ray Diffraction (XDR) -- 4 Results and Discussion -- 4.1 Morphology of CNFs -- 4.2 Removal of Non-cellulosic Elements (ATR-FTIR) -- 4.3 Thermogravimetric Analysis -- 4.4 Crystallinity Index (CrI) -- 5 Conclusions -- References -- Research into Novel Coatings on Composites and Technical Polymers, with Tailored Functionalities for the Transport and Biomedical Industries -- 1 Introduction -- 2 Methodology -- 2.1 Wire Arc Spray Process -- 2.2 Pre-treatment Selection -- 2.3 Pre-treatment Execution -- 3 Results -- 3.1 Mechanical Pre-treatment (Sand Blasting) -- 3.2 Laser Pre-treatment -- 3.3 Adhesion Test Results -- 4 Conclusions -- References -- Development of Virtual Tools for the Validation Study of Rigid Catenary Installations. 1 Introduction -- 2 Normative Framework -- 3 Simulation Tools Utility -- 4 Model Development for OCR -- 5 Model Validation -- 6 Conclusions -- References -- Assessment of Lower Limb Muscle Activation During Gait Assisted by a Cable-Actuated Exoskeleton -- 1 Introduction -- 2 Materials and Methods -- 2.1 Experimental Data -- 2.2 Dynamic Simulation -- 3 Results -- 3.1 Muscle Activations -- 3.2 Metabolic Cost -- 4 Discussion -- 5 Conclusion -- References -- Development of a Modular Test Bench for Cable-Driven Synergy-Based Exosuit Actuation and Control Strategies -- 1 Introduction -- 2 Methodology -- 2.1 Test Bench Design Theory -- 2.2 Construction of the Test Bench and its Modules -- 3 Tests Conducted -- 3.1 Motor Position Control -- 3.2 Analysis of Synergy Based Actuation Strategies -- 4 Results and Discussion -- 4.1 Adjusting Motor Position Control Parameters -- 4.2 Analysis of Synergy-Based Actuation -- 5 Conclusions -- References -- Biomechanical Study of the Addition of the Interferential Screw in the Repair of the Distal Biceps Brachii Tendon -- 1 Introduction -- 2 Methodology -- 2.1 Materials -- 2.2 Testing Protocol -- 2.3 Data Analysis -- 3 Results -- 4 Conclusions -- References -- Analysis of the Dorsolateral Prefrontal Cortex MNI Coordinates -- 1 Introduction -- 1.1 Dorsolateral Prefrontal Cortex (DLPFC) -- 1.2 Localization methods for DLPFC -- 2 Methodology -- 3 Results -- 3.1 Coordinates in MNI of the DLPFC -- 4 Conclusions -- References -- Vehicle Engineering -- Predictive Methodology to Optimize Knocking Behavior in the Transformation of Engines to Gaseous Fuels -- 1 Introduction -- 2 Methods and Materials -- 2.1 Materials -- 2.2 Methodology -- 3 Results -- 3.1 Knocking Zone -- 3.2 Experimental Results -- 4 Conclusions -- References -- Automatic Sight Distance Estimation for Overtaking Maneuvers -- 1 Introduction -- 2 Method -- 3 Results. 4 Conclusions -- References -- Assessing a Deterministic Model for Autonomous Driving Through Visual Behavior -- 1 Introduction -- 2 Driving Model -- 3 Experiments -- 3.1 Participants -- 3.2 Instrumentation -- 3.3 Procedure -- 4 Results -- 5 Conclusions -- References -- Tubular Structure of an Urban Electric Vehicle with High Crashworthiness Performance -- 1 Introduction -- 2 Methodology -- 2.1 Torsional and Bending Stiffness -- 2.2 Durability Tests -- 2.3 Crashworthiness Performance -- 3 Results -- 3.1 Torsional and Bending Stiffness -- 3.2 Durability Tests -- 3.3 Crashworthiness Performance -- 4 Conclusions -- References -- On the Use of Carbon Fiber Composites for the Enhancement of the Rollover Resistance of Steel Buses -- 1 Introduction -- 2 Methodology -- 2.1 Bending Collapse Experimental Setup -- 2.2 Concept Modeling of the Structure -- 3 Results -- 4 Conclusions -- References -- Numerical-Experimental Analysis of the Sealing Efficiency Utilizing Stresses Produced to an Engine Gasket Manufactured by CRS of ¼ Hardness with a Nitrile Coating on Both Sides -- 1 Introduction -- 2 Methodology for Performing Thermal Analysis -- 3 Solution and Results of Static Analysis with Thermal Loads -- 4 Conclusions -- References -- Low-Cost Model for the Estimation of Pollutant Emissions Based on GPS and Machine Learning -- 1 Introduction -- 2 Materials and Methods -- 2.1 Proposed Methodology -- 2.2 Data Collection in Real Driving Conditions -- 2.3 Test Routes -- 2.4 Estimation of Pollutants -- 3 Conclusions -- References -- Energy and Thermal Engineering -- Development of a Reactor Network Model to Predict Pollutant Emissions from Aviation Gas Turbines -- 1 Introduction -- 2 Methodology -- 3 Results -- 4 Conclusions -- References -- Electricity and Hydrogen Generation from Food and Vegetable Wastes - Technical and Economic Analysis -- 1 Introduction. 2 Methodology.

ISBN: 9783031385636

Index Terms--Genre/Form:
Electronic books.

LC Class. No.: TJ1-1570